This system is based on the heat pipe principle.

Heat is transferred back from the hot screw tip to the cold feed zone, resulting in considerable energy saving.

Cimitherm is a self-regulating system that adjusts to changing heat transfer requirements & does not require any adjustments.

The venting port on the barrel is coupled with a specially designed efficient venting pump for effective removal of air and gases generated during the plastification process.

It is provided with complete sequencing logic for interface with upstream and downstream equipments used in extrusion line.

Dual display PID temperature controllers for extruder and die zones are also provided.

To guarantee optimal ease of operation, all set-point and actual values along the extrusion line can be processed, visualized and evaluated at a central location.

Metering unit facilitates accurate adjustment of the screw filling factor and plasticizing capacity.

It is ideal for materials with the possibility of density variations & particularly suitable for processing regrind and pellets.

Specially designed barrel heating cooling elements (air power cooling) and precise locations of thermocouples ensure accurate temperature control. The large surface area of cooling elements result into the highest efficiency and lowest maintenance.

A novel wear resistance coating technique, ensures exceptional long life of screw & barrel, the heart of the extruder.

The wearing layer achieved with this technique is denser, more compact and less brittle than conventional coatings applied with customary methods.

We guarantee extreme abrasion resistance.